UFC 83 Serra vs St-Pierre 2 PPV HDTV XviD-aAF

More MMA!

It’s the moment all the MMA fans have been waiting for Matt “The
Terror” Serra Takes on Georges “Rush” St. Pierre on UFC 83.

Let me tell you this PPV was one of the best UFC PPVs I
have seen in a long time. Good solid fight card. Great Matches, an all
around great Pay Per View. I hope you MMA fans enjoy this PPV as much
as I did. It was brought to us by the group aAF so thank you to them
for their speedy uploading of the event! Quality is great as the source
was HDTV. Enjoy!

MAIN CARD

Champ Matt Serra vs. Georges St. Pierre (title-unification bout)

Rich Franklin vs. Travis Lutter

Nate Quarry vs. Kalib Starnes

Michael Bisping vs. Charles McCarthy

Marc Bocek vs. Mac Danzig

UFC.83.Serra.vs.St-Pierre.2.PPV.HDTV.XviD-aAF

624×352 - XviD - 16:9 - 29.97fps - VBR 128 kbps - MP3 - 1.37 GB

Torrent - NFO - NZB - Official Site

Bypass any Firewall or Throttling ISP

BitTorrent: Bypass any Firewall or Throttling ISP with SSH

On some networks it’s impossible to use BitTorrent. For example, if
you’re at work, school, or connected to Comcast or a public hotspot.
But there’s an easy solution to overcome this problem. By using a
secure connection (SSH), you can bypass almost every firewall or
traffic shaping application.

http://torrentfreak.com/bittorrent-over-ssh-071014/

Here’s a relatively simple 3-step guide that will show you how to set it up.

I wouldn’t recommend BitTorrent over SSH as a permanent solution since
it will cripple the servers of the SSH providers. If you’re looking for
a long term solution check out a VPN service such as Relakks https://www.relakks.com/?cid=gb

1. Get an SSH account.

You need an SSH account in order to get this working. You can try one of these free shell providers from this list http://www.dmoz.org/Computers/Internet/Access_Providers/Unix_Shell_Providers/Free_Shells/ . I currently use silenceisdefeat http://silenceisdefeat.org/ which requires a small $1 donation. However, the account is immediately activated and works fine for me.

2. Download, Install and Configure Putty

Download Putty http://www.chiark.greenend.org.uk/~sgtatham/putty/
, store it somewhere on your computer and run it. In the session
screen enter the host name (I use ssh.silenceisdefeat.org), the port
number (22), and tick the connection type box (SSH).

http://torrentfreak.com//images/ssh-putty-s.jpg

Next, go to SSH –> Tunnels, enter a source port and tick the dynamic
box. I’m using port 23456, but you are free to choose any post you like
as long as it’s available.

http://torrentfreak.com//images/ssh-putty-tunnels.jpg

When you’re done, it might be a good idea to save the session so you
don’t have to enter the info next time you run Putty. If you’re ready,
hit the “open” button in the session screen. A command-line interface
will pop-up so enter your username and password that you received from
your shell-provider, and you’re done.

3. Configure your BitTorrent client.

The last step is to configure your BitTorrent client. I will show you
how it’s done in uTorrent and Azureus but other BitTorrent clients use
a similar setup.

uTorrent: go to Options > Preferences > Connection. Enter your
port number (I use 23456), socks 4 or 5 as type, and localhost in the
proxy field.

Azureus: go to Tools > Options > Connection > Proxy Options.
Tick the “Enable proxying of tracker communications” and “I have a
SOCKS proxy” box. Next, enter your port number in the port field (I use
23456) and localhost in the host field.

http://torrentfreak.com//images/ssh-utorrent.jpg

When you’re done, restart your BitTorrent client and you’re ready to
go. BitTorrent over SSH tends to be a bit slower than your normal
connection, but it’s a great solution when BitTorrent connections are
blocked or throttled.

For those on a Mac OSX, please check out this great tutorial http://www.whalesalad.com/2006/08/27/tunneling-BitTorrent-over-ssh/ (which in part inspired this article) for more details. It includes instructions on how to do this on a Mac, using Azureus.

--------------------------------------------------------------------------------------------------------------------------

VPN service

https://www.relakks.com/?cid=gb

http://www.vpntunnel.co.uk/

--------------------------------------------------------------------------------------------------------------------------

Encrypting your torrents will prevent throttling ISP’s from shaping your traffic.

What does encryption Do?

The RC4 encryption obfuscates not only the header but the entire
stream. This means that it’s very hard for your ISP to detect that the
traffic you are generating comes from BitTorrent.

Note that RC4 uses more CPU time than the plain encryption or no
encryption. It is however harder to identify for traffic shaping devices

--------------------------------------------------------------------------------------------------------------------------

Azureus

1. Go to: Tools > Options > Connection > Transport Encryption

2. Check the ‘require encrypted transport’ box.

3. Choose RC4 in the ‘minimum encryption’ dropdown box

note that RC4 uses more CPU time than the plain encryption or no
encryption. It is however harder to identify for traffic shaping devices

4. You can choose to tick the ‘Allow non-encrypted outgoing connections
if encrypted connection attempt fails’ box. This will ensure
compatibility with clients that are not using encryption. However, it
makes it easier for your ISP to detect BitTorrent traffic. I recommend
that you try to tick this box first. If you are still not getting
proper speeds untick it

5. Tick the ‘Allow non-encrypted incoming connections’ box

--------------------------------------------------------------------------------------------------------------------------

Bitcomet

1. Go to: Options > Preferences > Advanced > Connection

2. Go to: ‘Protocol encryption’ You can choose between ‘auto detect’
and ‘always’. Auto detect will give you more connections but offers
less protection against traffic shapers.

I would recommend to try auto detect first, if that doesn’t increase your speeds you need to switch to always

--------------------------------------------------------------------------------------------------------------------------

uTorrent

1. Go to: Options > Preferences > BitTorrent

2. Go to ‘Protocol encryption’, you can choose between ‘enabled’ and
‘forced’. ‘Enabled’ will give you more connections but offers less
protection against traffic shapers.

I would recommend to try ‘enabled’ first, if that doesn’t increase your speeds you need to swich to ‘forced’.

3. Ticking ‘Allow legacy incoming connections’ allows non ecrypted
clients to connect to you. This improves compatibility between clients
but makes you more vulnerable to traffic shapers.

I would recommend to tick this box, but if that doesn’t increase your speeds, untick it!

Know What You Are Torrenting: Scene Guide

Movies:

CAM -

A cam is a theater rip usually done with a digital video camera. A mini
tripod is sometimes used, but a lot of the time this wont be possible,
so the camera may shake. Also someone sitting there filming the movie
might not sit straight the whole time, and then you have a angled
picture. If cropped properly, this is hard to tell unless there's text
on the screen, but a lot of times these are left with triangular
borders on the top and bottom of the screen. Sound is taken from the
onboard microphone of the camera. As an example, in comedies, laughter
can often be heard during the film. These factors cause the picture and
sound quality to usually come out quite poor, but sometimes we're
lucky, and the theater will be fairly empty and a fairly clear signal
will be heard.

TELESYNC (TS) -

A telesync is the same spec as a CAM except it uses an external audio
source (most likely an audio jack in the chair for hard of hearing
people). A direct audio source does not ensure a good quality audio
source, as a lot of background noise can interfere. A lot of the times
a telesync is filmed in an empty cinema or from the projection booth
with a professional camera, giving a better picture quality. Quality
ranges very, and you should check the sample before downloading the
full release. A high percentage of Telesyncs are CAMs that have been
mislabeled.

TELECINE (TC) -

A telecine machine copies the film digitally from the reels. Sound and
picture should be very good, but due to the equipment involved and cost
telecines are fairly uncommon. Generally the film will be in correct
aspect ratio, although 4:3 telecines have existed. TC should not be
confused with TimeCode , which is a visible counter on screen
throughout the film.

R5

Over the past six months, the major movie studios have been releasing
retail DVD's early in Russia and the Ukraine. They did this to try and
stop the widespread use of pirated telecines. Most telecines (TC)
currently being released are R5 retail DVD's. An R5 retail DVD is most
always rushed out by the studio; because they are basically competing
with pirates, so there is little to no cleanup of the film after the
telecine process. So the main difference between telecines put out by
the pirates and R5 DVD's is that the R5's are done using pro equipment,
professional studios, and professional people. The quality of R5
retail is very similar to a DVDSCR (DVD Screener), no time is usually
spent cleaning up DVDSCR’s either.

Example:

Moviename.R5.format-group <--- This means R5 retail with English audio

Moviename.R5.LINE.format-group <--- This means R5 retail which had
no English audio and was therefore synced with a direct line of English
audio

SCREENER (SCR) -

A pre VHS tape, sent to rental stores, and various other places for
promotional use. A screener is supplied on a VHS tape, and is usually
in a 4:3 screen format, although letterboxed screeners are sometimes
found. The main draw back is a "ticker," (a message that scrolls at the
bottom of the screen, with the copyright and anti-copy telephone
number). Also, if the tape contains any serial numbers, or any other
markings that could lead to the source of the tape, these will have to
be blocked, usually with a black mark over the section. This is
sometimes only for a few seconds, but unfortunately on some copies this
will last for the entire film, and some can be quite big. Depending on
the equipment used, screener quality can range from excellent if done
from a MASTER copy, to very poor if done on an old VHS recorder. Most
screeners are transferred to VCD, but a few attempts at SVCD have
occurred, some looking better than others.

DVD-SCREENER (DVDscr) -

Same as a screener, but transferred off a DVD. Usually letterbox
format, but without the extras that a DVD retail would contain. The
ticker is usually not seen in the black bars. If the ripper has any
skill, a DVDscr should be very good. These are usually transferred to
SVCD or DivX/XviD.

DVDRip -

A copy of the final released DVD. If possible this is released PRE
retail, (for example, Star Wars episode 2) and again, this format
should be excellent quality. DVDrips are released in SVCD and DivX/XviD.

VHSRip -

Transferred off a retail VHS, mainly skating/sports videos and XXX releases.

TVRip -

TV episode that is either from Network (capped using digital
cable/satellite boxes are preferable) or PRE-AIR from satellite feeds
sending the program around to networks a few days earlier (do not
contain "dogs" but sometimes have flickers etc) Some programs such as
WWF Raw Is War contain extra parts, and the "dark matches" and
camera/commentary tests are included on the rips. PDTV is capped from a
digital TV PCI card, generally giving the best results, and groups tend
to release in SVCD for these. VCD/SVCD/DivX/XviD rips are all supported
by the TV scene.

WORKPRINT (WP) -

A workprint is a copy of the film that has not been finished. It can be
missing scenes, music, and quality can range from excellent to very
poor. Some WPs are very different from the final print, (Men In Black
is missing all the aliens, and has actors in their places), and others
can contain extra scenes (Jay and Silent Bob). WPs can be nice
additions to the collection once a good quality final has been obtained.

DivX Re-Enc -

A DivX re-enc is a film that has been taken from its original VCD
source, and re-encoded into a small DivX file. Common groups are
releasing these are SMR and TND. These aren't really worth downloading,
unless you're that unsure about a film, and you only want a 200mb copy
of it. Generally I would avoid these.

Watermarks -

A lot of films come from Asian Silvers/PDVD (see below) and these are
tagged by the people responsible. Usually with a letter/initials or a
little logo, generally in one of the corners.

Asian Silvers / PDVD -

These are films put out by eastern bootleggers, and these are usually
bought by some groups to put out as their own. Silvers are very cheap
and easily available in a lot of countries, and its easy to put out a
release, which is why there are so many in the scene at the moment,
mainly from smaller groups who don't last more than a few releases.
PDVDs are the same thing pressed onto a DVD. They have removable
subtitles, and the quality is usually better than the silvers. These
are ripped like a normal DVD, but usually released as VCD.

Scene Tags...

PROPER -

Due to scene rules, whoever releases the first Telesync has won that
race (for example). But if the quality of that release is fairly poor,
or if another group has another telesync (or the same source in higher
quality), then the tag PROPER is added to the folder to avoid it being
duped. PROPER is the most subjective tag in the scene, and a lot of
people will generally argue whether the PROPER is better than the
original release. A lot of groups release PROPERS just out of
desperation due to losing the race. A reason for the PROPER should
always be included in the NFO.

LIMITED -

A limited movie means it has had a limited theater run, generally opening in less than 250 theaters.

INTERNAL -

An internal release is done for several reasons. Classic DVD groups do
a lot of INTERNAL releases, as they wont be dupe'd on it. Also, lower
quality theater rips are done INTERNAL so not to lower the reputation
of the group. Also, it can be labeled INTERNAL due to the amount of
rips already released. An INTERNAL release is available as normal on
the groups affiliate sites, but they can't be traded to other sites
without request from the site ops. Some INTERNAL releases still trickle
down to IRC/Newsgroups, it usually depends on the title and the
popularity. Earlier in the year people referred to Centropy going
"internal". This meant the group was only releasing the movies to their
members and site ops. This is in a different context to the usual
definition.

STV -

Straight To Video. Was never released in theaters, and therefore a lot of sites do not allow these.

ASPECT RATIO TAGS -

These are *WS* for widescreen (letterbox) and *FS* for Fullscreen.

REPACK -

If a group releases a bad rip, they will release a Repack which will fix the problems.

NUKED -

A film can be nuked for various reasons. Individual sites will nuke
files for breaking their rules (such as "No Telesyncs"), but if the
film has something extremely wrong with it, (no soundtrack for 20mins,
CD2 is incorrect film/game etc), then a global nuke will occur, and
people trading it across sites will lose their credits. Nuked films
can still reach other sources such as p2p/usenet, but it's a good idea
to check why it was nuked in the first case. If a group relizes there
is something wrong, they can request a nuke.

NUKE REASONS...

This is a list of common reasons a film can be nuked for...

BAD A/R = bad aspect ratio, i.e. people appear too fat/thin

BAD IVTC = bad inverse telecine...process of converting frame rates was incorrect.

INTERLACED = black lines on movement as the field order is incorrect.

DUPE -

Dupe basically means what it says. If something exists already, then
theres no reason for it to exist again without proper reason. Usually
the group releasing the DUPE will explain the reason for the release in
the NFO.

I hope this info helps all you noobs out. I was a noob once, and I
know how confusing stuff can be. I looked at a lot of forums to find
all this data....so if you see something similar to what you have, just
know you were smarter than the rest.

HOW TO: Use RSS/uTorrent to download TV

Nice thing about uTorrent is that it has an rss-feed downloader built in. That being said all you need is uTorrent.

Configuring RSS Downloader with a site

Start up uTorrent. Open RSS Downloader. This can be done one of three ways:

A) Go to Options->RSS Downloader B) Hit CTRL-R C) Click on the RSS Button (see picture below(circled in red)) This will bring you to the following: Click on the ADD button to create a new site. You only need to fill in the following URL information: Also, there is a trailing semi-colon (; at the end of the feed. Now, your feed should look like this: That's it for th feed portion. Now, lets go see if we got it configured correctly. Go to the tab called Releases. That tab should look like this: Now, Click on the Update button (circled in red), and you should get the following: If it does, great! If not, go back through my notes and see what might have gotten messed up. Configuring what files to grab Ok, now that we can see the files on the site, it's time that we configure our filters to grab what we want on a continious basis. I do not know all the ins and outs of every little detail but, everything I will give you should get you the basics working. As I learn more or hear from the community, I'll update this file with the relavant info. Now, go click on the Favorites tab (circled in red), then click on the Add button (also circled in red). When you clicked on the Add button, the word New Filter shows up (see below). Type in the name of the show you are building the filter for (in my Example Battlestar Galactica). Now,lets fill out the information to the right. Sorry about the size of the image but, felt it important be able to read. Ok, now, each field is as follows: Filter: - Name of the show you are interested in. The asterisk * is a wild-character, the ? is for a single wild character (like the periods you get in a show title from the torrent) Not: - What you do NOT want to match on. In my case, I do not want to download versions of the show that are AC3 encoded. Save in: - The location to save the download. This can be different for each torrent if you wish. Feed: - This is which feed you want to use. You can actually set up multiple sites back in the site list, this drop-down field allows you to either select a specific site to get it from, or search all sites. Of Course, I don't know of any sites other thatn Revo Quality - No help here.... Episode Number: - (Checked)This is useful in that it will only grab the Episode number going forward from what you put in. I have read up on this a little bit. Looks like you can actually put the value in as one of two ways: 3x08 or S03E08 (which is how the torrents are written now a days). The hyphen at the end is to go through what episode. In the example, this will go through season 3, Episodes 8 through 26, which is written as seen in the image. Filter matches original.... - (Checked) Needs to be checked is all I know. Give download highest... - (UnChecked) ? Smart ep. filter - (Checked) This is the episode filter which makes sure not to re-download the same file if muiltiple copies showed up on a server. Minimum interval: - Donno... Label for new torrents: - Beats me... That's it! We are finished.